iSoaker.net :: Soaking the world!

Here's an Internal Picture of a Water Warriors Piranha. While not every single part is pointed to, the main ones are. What do you call/how would you describe a certain part or section identified by the numbers? I'll post up the names I use after a few responses are posted.

Notes:
- if you don't need to come up with a name for a part you are uncertain about. Just give names for the numbers you use specific names for.
- you may need to expand your window to see the whole picture. Parts indicated are labeled 1 to 20.
- for sake of clarity, #16 is pointing to the black metal rod, not any of the plastic parts.

1: Reservoir cap.
2: Reservoir.
3: Reservoir output hose.
4: Trigger handle.
5: Check-Valve.
6: Pump shaft.
7: Pump cap.
8: Pump rod.
9: Pump handle.
10: Pressure relief valve.
11: Input pipe for pressure chamber.
12: Electronic pressure-gauge.
13: Pressure gauge activation switch.
14: Pressure chamber.
15: Trigger valve.
16: Trigger rod.
17: Trigger.
18: Nozzle selector.
19: Nozzle.
20: Outer casing (Or battery compartment, I can't tell which its pointing at).

1. cap
2. reservoir
3. tube (because it's flexible)
4. grip/handle
5. check valve (or pressure release valve - can't see it well)
6. pump tube
7. pump cap
8. pump rod
9. pump handle
10. pressure release valve (or check valve - can't see it well)
11. pipe (because it's rigid)
12. pressure gauge
13. pressure gauge button (not a conventional component)
14. pressure chamber [case]
14.5 bladder
15. trigger [ball] valve
15.25 pin
15.5 trigger lever
16. trigger arm?
17. trigger
18. nozzle selector
19. nozzle
20. battery? (not a conventional component)

20 is meant to be pointing to where batteries are kept; true, not a standard component, but it made sense to include it for this water blaster line.
13 as well is not a conventional component, but also made sense to include it for this image.

Thanks for the lists so far. I'll push mine up soon. Basically, I'm working on compiling commonly used terms of various blaster parts.

1. Reservoir cap
2. Reservoir
3. Reservoir to 1st check valve tubing
4. Back/Trigger Grip?!?! (or base-casing/frame?)
5. 1st check valve
6. Pump shaft
7. Pump Cap
8. Pump Rod
9. Pump Handle
10. Pressure Relief Valve
11. 2nd check valve
12. Electronic light-based pressure guage
13. Pressure gauge activation button
14. Pressure Chamber (Disk)
15. Firing/trigger valve (ball valve)
16. Trigger connector?!?! =/
17. Trigger
18. Nozzle selector
19. Nozzle
20. Battery compartment

While I don't consider many of these to be everyday terms, they would be what I would use should the need arise. (Though I'd probably shorten the naming, especially on the field)

Here's my listing:

1: Reservoir Cap / Cap
2: Reservoir / Tank
3: Reservoir Intake Tubing / Reservoir Feed Tubing
4: Grip / Trigger Grip
5: Check Valve
6: Pump Shaft
7: Pump Cap
8: Pump Rod / Pump Shaft
9: Pump Grip
10: Pressure Release Valve
11: Pipe
12: Electronic Pressure Gauge
13: Electronic Pressure Gauge Trigger
14: Pressure Chamber / Diaphragm Pressure Chamber
15: Nozzle Valve / Trigger Valve
16: Trigger Rod
17: Trigger
18: Multiple Nozzle Selector
19: Nozzle
20: Battery Compartment

--------------------------

I'll be compiling these terms with those above. Any other parts name suggestions still welcome.

Before I unpin this thread and compile names used above, anyone else have any other terms or names they'd wish to add to the above listings? I'll unpin this topic on May 5, 2008.

Soak on!